> ## Documentation Index
> Fetch the complete documentation index at: https://docs.axottle.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Signal detection

> Where to watch Anti-Abuse signals and run manual checks.

Signals are located in **Security → Signals**.

## Run the check.

Click **Check now**. Once completed, the list will be updated.

Each card shows the signal type, the target, the values and the threshold applied. Press the card to open the details.

## Set up the detectors.

Go to the tab **Policy**. Here you can configure signal collection, port scanning, SMTP, UDP amplification, access transfer and other categories.

Parameters labeled `not connected` are stored, but do not affect detection.

## Verification

> [!TIP]
>
> After **Check now** tab shows the detected signals or the state of **No signals**.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.