Manual plans, auto-recovery policy, route reserves, and stop after failure.
Open Configures → Flow → Recovery. This is where A autorestoration, Run manually and S Your plans. By default, the changing recovery requires manual confirmation. The operator can allow automatic actions in advance by the policy of a particular Flow.
Manual launch
Open “Run Manually” and select the appropriate plan and goal.
Perform a preliminary check. Examine the steps, effects, and causes of the blockage.
Confirm the plan shown and launch it.
Read the result of the actions and the final check of the route in history.
Successfully sending a task to an agent does not mean recovery. Flow Guard checks the result; if there is insufficient or conflicting data, further diagnosis is required.
Turning on the automation
In Auto-Recovery, select Restore Auto-.
For the desired transit, WARP or proxy, switch on and mark allowable reserves.
Include authorized service recovery plans. The card shows the actions that are going into the resolution.
Set the number of failure confirmations, the pause between attempts, and the total hour limit.
Click Save and enable.
The policy is executed on the server; you don’t need to keep the browser open. It can be prepared before the first use of Flow, but the launch will remain blocked until the running version appears.Confirmations are different sequential checks of one failure and the active version. Reopening one result does not add confirmation. After trying, new checks are needed to re-act; pauses and limits continue to apply.
Auto-route switching
Reserves are selected from the working version of Flow. First add and apply the desired outputs on the canvas, then allow them in the policy. Reserve, which depends on the faulty site or creates a cycle, can not be used.
Method of selecting
What is counted by
Priority
Order of permitted reserves.
Minimum latency
Fresh measured RTT from CTRL to node.
Minimum boot
Fresh CPU boot from agent data.
RTT from CTRL is not a delay from the client, the CPU does not show the bandwidth of the channel. In the absence of measurements, priority selection should be allowed separately. Unknown health is not considered a successful test.Direct Internet is used only as an expressly authorized bypass. Before action, the output is re-checked. Changes to the pool directory not yet applied to Flow require manual application.Switching creates a new working version from the image used, saves the conditions of incoming communications and the path of the selected reserve, and the current user draft does not unfold or overwrite this switch.
There is no automatic return to the old route. After switching, check the canvas before the next manual application: the old draft may return the faulty path.
Your plans.
In the script card, select What to do when a failure occurs · configure steps → Create your own version of this plan or create a plan under Your plans. Set the event, goal and acceptable actions, perform validation and save.A saved plan doesn’t get permission to run automatically on its own. Include its version in the policy and keep the policy. Once you change the plan, you need to confirm the updated version. Plans with mandatory manual steps or actions that are not automatically triggered.
Diagnosis of Support Events
In HY plans → Events that launch the plan → Support and complaints available fresh complaint about Flow in open appeal, expired obligation SLA urgent ticket, confirmed operator incident and escalation of open appeal. Terms use saved binding to a specific Flow.Such a diagnosis does not automatically close the ticket or allow the restart of an arbitrary node; an old closed appeal complaint does not become a new failure after reopening without a new binding; retaining a plan requires a separate inclusion of its version in the policy.The unsaved policy remains in the current browser tab during transitions and reboots. If you conflict with changes from another operator, download the current version and check your edits before saving.
Stop and fail
Turning off the automation cancels the automatic actions that have not yet been sent; the task already transferred to the agent can be completed; turning off the policy does not roll back the completed steps.An unconfirmed rerouting result suspends automation. Check the active version, nodes, and launch history, then explicitly resume it. The policy change does not nullify your spent hourly budget.
Verification
Make sure you keep the correct version of the policy and plans, have a working version of Flow, and the interface shows the reason for the wait or readiness. Once launched, check the history, the steps actually completed, and a fresh route check.
Rollback
First, disable automatic actions if they interfere with parsing. To return the configuration, use the working version of Flow. Restore the completed service actions according to the result of a specific plan; disabling automation does not constitute a rollback.Check the availability of features in the installed version in the panel; this reconciliation does not confirm the deployment on the servers.
{"docsConfig":{"theme":"mint","$schema":"https://mintlify.com/docs.json","name":"Axottle","description":"Документация Axottle — панель, Flow Studio (Конфиги), транзитные пулы, CDN, восстановление и Axosun.","colors":{"primary":"#16A34A","light":"#22C55E","dark":"#15803D"},"logo":{"light":"https://mintcdn.com/axottle/M_1pCtiuK-QG0_4b/images/logo.png?fit=max\u0026auto=format\u0026n=M_1pCtiuK-QG0_4b\u0026q=85\u0026s=540a27bd4cb90fb752a37c98fd580664","dark":"https://mintcdn.com/axottle/M_1pCtiuK-QG0_4b/images/logo.png?fit=max\u0026auto=format\u0026n=M_1pCtiuK-QG0_4b\u0026q=85\u0026s=540a27bd4cb90fb752a37c98fd580664"},"favicon":{"light":"https://mintcdn.com/axottle/M_1pCtiuK-QG0_4b/images/logo.png?fit=max\u0026auto=format\u0026n=M_1pCtiuK-QG0_4b\u0026q=85\u0026s=540a27bd4cb90fb752a37c98fd580664","dark":"https://mintcdn.com/axottle/M_1pCtiuK-QG0_4b/images/logo.png?fit=max\u0026auto=format\u0026n=M_1pCtiuK-QG0_4b\u0026q=85\u0026s=540a27bd4cb90fb752a37c98fd580664"},"navbar":{"links":[{"href":"https://t.me/axosupport","label":"Поддержка"}]},"footer":{"socials":{}},"styling":{"latex":false},"navigation":{"languages":[{"language":"ru","href":"ru"},{"language":"en","href":"en"}]}},"deployment":{"deploymentMetadataValue":{"subdomain":"axottle","hasAudioNarration":false,"actualSubdomain":"axottle","customDomains":["docs.axottle.com"],"gitSource":{"type":"github","owner":"axottle","repo":"docs","deployBranch":"main","contentDirectory":"","isPrivate":true,"mountPath":"","label":""},"entitlements":{"AI_CHAT":{"status":"DISABLED"}},"buildId":"6ae5d58e6d5c730af24ef77e","clientVersion":"0.0.4263","searchFilterCounts":[{"language":"en","tag":"Documentation","count":160},{"language":"ru","tag":"Документация","count":160},{"language":"en","tag":"Telepúrte","count":27},{"language":"ru","tag":"Telepúrte","count":27},{"language":"en","tag":"Flow Studio","count":15},{"language":"en","tag":"Customer support","count":15},{"language":"ru","tag":"Flow Studio","count":15},{"language":"ru","tag":"Поддержка клиентов","count":15},{"language":"en","tag":"Getting started","count":11},{"language":"ru","tag":"Начало работы","count":11},{"language":"en","tag":"Nodes and agents","count":10},{"language":"en","tag":"Security","count":10},{"language":"ru","tag":"Ноды и агенты","count":10},{"language":"ru","tag":"Безопасность","count":10},{"language":"en","tag":"Health and self-healing","count":9},{"language":"ru","tag":"Здоровье и self-heal","count":9},{"language":"en","tag":"Axosun assistant","count":8},{"language":"en","tag":"Control panel","count":8},{"language":"ru","tag":"Axosun — ассистент","count":8},{"language":"ru","tag":"Панель управления","count":8}]},"assistantConfig":{"enableAskAiButton":false,"enableStarterQuestions":false,"enableContextualStarterQuestions":false,"enableAskAiSearchBar":true},"basePath":"","hasChatPermissions":false,"hasWebMcpPermissions":false,"toggles":[{"name":"kill-isr","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-rbac-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-mintlify-slack","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-integrations-settings","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"rbac-expansion","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-pr-grouping","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-prefix","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"analytics-v7","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"user-flows-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"no-publish-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-onboarding","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving-live","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"stripTemperatureMiddleware","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"support-platform-pylon-zendesk","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"instant-rollback","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications-server","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-fable","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fixed-ai-action-pricing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"site-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automation-resolve-merge-conflict","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"scoped-publishing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"mintql","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"page-level-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-version-history-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"billing-page-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"full-page-search","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workspace-projects","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"assistant-v5","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fork-pr-previews","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"revalidation-jwt","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-sso-scim","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"hobby-abuse-scan","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"dashboard-inbox","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-signup","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-dual-write","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-enabled","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"approve-review-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-metadata","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"sso-setup-deadline-banner","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-serve","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"live-agents","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"starter-pricing","enabled":true,"variant":{"name":"treatment","enabled":true,"payload":{"type":"string","value":"treatment"},"feature_enabled":true},"impressionData":false},{"name":"llms-txt-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"wildcard-email-auth","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false}],"googleFontsInlined":false},"customCss":[]}
{"page":{"pagePath":"en/connection-units/recovery","slug":"/en/connection-units/recovery","pageMetadata":{"title":"Flow Guard: Recovery","description":"Manual plans, auto-recovery policy, route reserves, and stop after failure.","icon":"wrench","href":"/en/connection-units/recovery"},"description":{"compiledSource":"\"use strict\";\nconst {jsx: _jsx} = arguments[0];\nconst {useMDXComponents: _provideComponents} = arguments[0];\nfunction _createMdxContent(props) {\n const _components = {\n p: \"p\",\n ..._provideComponents(),\n ...props.components\n };\n return _jsx(_components.p, {\n children: \"Manual plans, auto-recovery policy, route reserves, and stop after failure.\"\n });\n}\nfunction MDXContent(props = {}) {\n const {wrapper: MDXLayout} = {\n ..._provideComponents(),\n ...props.components\n };\n return MDXLayout ? _jsx(MDXLayout, {\n ...props,\n children: _jsx(_createMdxContent, {\n ...props\n })\n }) : _createMdxContent(props);\n}\nreturn {\n default: MDXContent\n};\n","frontmatter":{},"scope":{}},"pageType":"default","mdx":{"mdxSource":{"compiledSource":"\"use strict\";const{Fragment:_Fragment,jsx:_jsx,jsxs:_jsxs}=arguments[0];const{useMDXComponents:_provideComponents}=arguments[0];function _createMdxContent(props){const _components={a:`a`,li:`li`,ol:`ol`,p:`p`,strong:`strong`,tbody:`tbody`,td:`td`,th:`th`,thead:`thead`,tr:`tr`,..._provideComponents(),...props.components},{Heading,Table,Warning}=_components;if(!Heading)_missingMdxReference(`Heading`,true);if(!Table)_missingMdxReference(`Table`,true);if(!Warning)_missingMdxReference(`Warning`,true);return _jsxs(_Fragment,{children:[_jsxs(_components.p,{children:[`Open `,_jsx(_components.strong,{children:`Configures → Flow → Recovery`}),`. This is where `,_jsx(_components.strong,{children:`A autorestoration`}),`, `,_jsx(_components.strong,{children:`Run manually`}),` and `,_jsx(_components.strong,{children:`S Your plans`}),`. By default, the changing recovery requires manual confirmation. The operator can allow automatic actions in advance by the policy of a particular Flow.`]}),`\n`,_jsx(`a`,{id:`ручной-запуск`}),`\n`,_jsx(Heading,{level:`2`,id:`manual-launch`,children:`Manual launch`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsx(_components.li,{children:`Open “Run Manually” and select the appropriate plan and goal.`}),`\n`,_jsx(_components.li,{children:`Perform a preliminary check. Examine the steps, effects, and causes of the blockage.`}),`\n`,_jsx(_components.li,{children:`Confirm the plan shown and launch it.`}),`\n`,_jsx(_components.li,{children:`Read the result of the actions and the final check of the route in history.`}),`\n`]}),`\n`,_jsx(_components.p,{children:`Successfully sending a task to an agent does not mean recovery. Flow Guard checks the result; if there is insufficient or conflicting data, further diagnosis is required.`}),`\n`,_jsx(`a`,{id:`включение-автоматики`}),`\n`,_jsx(Heading,{level:`2`,id:`turning-on-the-automation`,children:`Turning on the automation`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsxs(_components.li,{children:[`In Auto-Recovery, select `,_jsx(_components.strong,{children:`Restore Auto-`}),`.`]}),`\n`,_jsx(_components.li,{children:`For the desired transit, WARP or proxy, switch on and mark allowable reserves.`}),`\n`,_jsx(_components.li,{children:`Include authorized service recovery plans. The card shows the actions that are going into the resolution.`}),`\n`,_jsx(_components.li,{children:`Set the number of failure confirmations, the pause between attempts, and the total hour limit.`}),`\n`,_jsxs(_components.li,{children:[`Click `,_jsx(_components.strong,{children:`Save and enable`}),`.`]}),`\n`]}),`\n`,_jsx(_components.p,{children:`The policy is executed on the server; you don’t need to keep the browser open. It can be prepared before the first use of Flow, but the launch will remain blocked until the running version appears.`}),`\n`,_jsx(_components.p,{children:`Confirmations are different sequential checks of one failure and the active version. Reopening one result does not add confirmation. After trying, new checks are needed to re-act; pauses and limits continue to apply.`}),`\n`,_jsx(`a`,{id:`автопереключение-маршрута`}),`\n`,_jsx(Heading,{level:`2`,id:`auto-route-switching`,children:`Auto-route switching`}),`\n`,_jsx(_components.p,{children:`Reserves are selected from the working version of Flow. First add and apply the desired outputs on the canvas, then allow them in the policy. Reserve, which depends on the faulty site or creates a cycle, can not be used.`}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Method of selecting`}),_jsx(_components.th,{children:`What is counted by`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Priority`}),_jsx(_components.td,{children:`Order of permitted reserves.`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Minimum latency`}),_jsx(_components.td,{children:`Fresh measured RTT from CTRL to node.`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Minimum boot`}),_jsx(_components.td,{children:`Fresh CPU boot from agent data.`})]})]})]}),`\n`,_jsx(_components.p,{children:`RTT from CTRL is not a delay from the client, the CPU does not show the bandwidth of the channel. In the absence of measurements, priority selection should be allowed separately. Unknown health is not considered a successful test.`}),`\n`,_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Direct Internet is used only as an expressly authorized bypass.`}),` Before action, the output is re-checked. Changes to the pool directory not yet applied to Flow require manual application.`]}),`\n`,_jsx(_components.p,{children:`Switching creates a new working version from the image used, saves the conditions of incoming communications and the path of the selected reserve, and the current user draft does not unfold or overwrite this switch.`}),`\n`,_jsx(Warning,{children:` There is no automatic return to the old route. After switching, check the canvas before the next manual application: the old draft may return the faulty path.`}),`\n`,_jsx(`a`,{id:`свои-планы`}),`\n`,_jsx(Heading,{level:`2`,id:`your-plans`,children:`Your plans.`}),`\n`,_jsxs(_components.p,{children:[`In the script card, select `,_jsx(_components.strong,{children:`What to do when a failure occurs · configure steps → Create your own version of this`}),` plan or create a plan under Your plans. Set the event, goal and acceptable actions, perform validation and save.`]}),`\n`,_jsx(_components.p,{children:`A saved plan doesn’t get permission to run automatically on its own. Include its version in the policy and keep the policy. Once you change the plan, you need to confirm the updated version. Plans with mandatory manual steps or actions that are not automatically triggered.`}),`\n`,_jsx(`a`,{id:`диагностика-по-событиям-поддержки`}),`\n`,_jsx(Heading,{level:`2`,id:`diagnosis-of-support-events`,children:`Diagnosis of Support Events`}),`\n`,_jsxs(_components.p,{children:[`In `,_jsx(_components.strong,{children:`HY plans → Events that launch the plan → Support and complaints`}),` available fresh complaint about Flow in open appeal, expired obligation SLA urgent ticket, confirmed operator incident and escalation of open appeal. Terms use saved binding to a specific Flow.`]}),`\n`,_jsx(_components.p,{children:`Such a diagnosis does not automatically close the ticket or allow the restart of an arbitrary node; an old closed appeal complaint does not become a new failure after reopening without a new binding; retaining a plan requires a separate inclusion of its version in the policy.`}),`\n`,_jsx(_components.p,{children:`The unsaved policy remains in the current browser tab during transitions and reboots. If you conflict with changes from another operator, download the current version and check your edits before saving.`}),`\n`,_jsx(`a`,{id:`остановка-и-неудача`}),`\n`,_jsx(Heading,{level:`2`,id:`stop-and-fail`,children:`Stop and fail`}),`\n`,_jsx(_components.p,{children:`Turning off the automation cancels the automatic actions that have not yet been sent; the task already transferred to the agent can be completed; turning off the policy does not roll back the completed steps.`}),`\n`,_jsx(_components.p,{children:`An unconfirmed rerouting result suspends automation. Check the active version, nodes, and launch history, then explicitly resume it. The policy change does not nullify your spent hourly budget.`}),`\n`,_jsx(`a`,{id:`проверка`}),`\n`,_jsx(Heading,{level:`2`,id:`verification`,children:`Verification`}),`\n`,_jsx(_components.p,{children:`Make sure you keep the correct version of the policy and plans, have a working version of Flow, and the interface shows the reason for the wait or readiness. Once launched, check the history, the steps actually completed, and a fresh route check.`}),`\n`,_jsx(`a`,{id:`откат`}),`\n`,_jsx(Heading,{level:`2`,id:`rollback`,children:`Rollback`}),`\n`,_jsxs(_components.p,{children:[`First, disable automatic actions if they interfere with parsing. To return the configuration, use the `,_jsx(_components.a,{href:`/en/connection-units/lifecycle#%D0%BE%D1%82%D0%BA%D0%B0%D1%82`,children:`working version of Flow`}),`. Restore the completed service actions according to the result of a specific plan; disabling automation does not constitute a rollback.`]}),`\n`,_jsx(_components.p,{children:`Check the availability of features in the installed version in the panel; this reconciliation does not confirm the deployment on the servers.`})]})}function MDXContent(props={}){const{wrapper:MDXLayout}={..._provideComponents(),...props.components};return MDXLayout?_jsx(MDXLayout,{...props,children:_jsx(_createMdxContent,{...props})}):_createMdxContent(props)}return{default:MDXContent};function _missingMdxReference(id,component){throw new Error(`Expected `+(component?`component`:`object`)+\" `\"+id+\"` to be defined: you likely forgot to import, pass, or provide it.\")}","frontmatter":{},"scope":{"config":{},"pageMetadata":{"title":"Flow Guard: Recovery","description":"Manual plans, auto-recovery policy, route reserves, and stop after failure.","icon":"wrench","href":"/en/connection-units/recovery"}}},"mdxSourceWithNoJs":null},"mdxExtracts":{"tableOfContents":[{"title":"Manual launch","slug":"manual-launch","depth":2,"children":[]},{"title":"Turning on the automation","slug":"turning-on-the-automation","depth":2,"children":[]},{"title":"Auto-route switching","slug":"auto-route-switching","depth":2,"children":[]},{"title":"Your plans.","slug":"your-plans","depth":2,"children":[]},{"title":"Diagnosis of Support Events","slug":"diagnosis-of-support-events","depth":2,"children":[]},{"title":"Stop and fail","slug":"stop-and-fail","depth":2,"children":[]},{"title":"Verification","slug":"verification","depth":2,"children":[]},{"title":"Rollback","slug":"rollback","depth":2,"children":[]}],"codeExamples":{}},"jsLinks":[],"subdomain":"axottle","siteName":"Axottle","title":"Flow Guard: Recovery - Axottle","navMaps":{"firstHrefInVersion":{},"firstHrefInLanguage":{"ru":{"href":"/ru/connection-units/recovery","matchLevel":1},"en":{"href":"/en/connection-units/recovery","matchLevel":0}}},"lastModified":"2026-10-31T08:37:50.849Z","originalFileLocation":"en/connection-units/recovery.mdx","locale":"en"},"headHtml":"\u003cscript data-mint-head>(function(){var d=document.documentElement,p=null;if(!p){try{p=localStorage.getItem(\"isDarkMode\")}catch(e){}if(p==='true')p='dark';else if(p==='false')p='light';if(p!=='light'\u0026\u0026p!=='dark'\u0026\u0026p!=='system')p=\"system\"}var r=p==='system'?(matchMedia(\"(prefers-color-scheme: dark)\").matches?'dark':'light'):p;d.classList.remove(r==='dark'?'light':'dark');d.classList.add(r);d.setAttribute(\"data-theme-preference\",p)})();\u003c/script>\u003cmeta data-mint-head name=\"description\" content=\"Manual plans, auto-recovery policy, route reserves, and stop after failure.\">\u003cmeta data-mint-head name=\"application-name\" content=\"Axottle\">\u003cmeta data-mint-head name=\"generator\" content=\"Mintlify\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon/android-chrome-192x192.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"apple-touch-icon\" type=\"image/png\" sizes=\"180x180\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon/apple-touch-icon.png\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon/favicon-16x16.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon/favicon-32x32.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon/favicon.ico\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon-dark/android-chrome-192x192.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon-dark/favicon-16x16.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon-dark/favicon-32x32.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon-dark/favicon.ico\" media=\"(prefers-color-scheme: dark)\">\u003cmeta data-mint-head property=\"og:title\" content=\"Flow Guard: Recovery - Axottle\">\u003cmeta data-mint-head property=\"og:description\" content=\"Manual plans, auto-recovery policy, route reserves, and stop after failure.\">\u003cmeta data-mint-head property=\"og:site_name\" content=\"Axottle\">\u003cmeta data-mint-head property=\"og:url\" content=\"https://docs.axottle.com/en/connection-units/recovery\">\u003cmeta data-mint-head property=\"og:type\" content=\"website\">\u003cmeta data-mint-head property=\"og:image\" content=\"https://axottle.mintlify.site/_mintlify/api/og/v2?division=Flow+Studio\u0026amp;title=Flow+Guard%3A+Recovery\u0026amp;description=Manual+plans%2C+auto-recovery+policy%2C+route+reserves%2C+and+stop+after+failure.\u0026amp;theme=1e6ecda9e4b4d51039034be1\u0026amp;signature=fa32ea5ae249e6da7638a860263b4a371159520f93a7fe0431dd22f20f310475\">\u003cmeta data-mint-head property=\"og:image:width\" content=\"1200\">\u003cmeta data-mint-head property=\"og:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"twitter:card\" content=\"summary_large_image\">\u003cmeta data-mint-head name=\"twitter:title\" content=\"Flow Guard: Recovery - Axottle\">\u003cmeta data-mint-head name=\"twitter:description\" content=\"Manual plans, auto-recovery policy, route reserves, and stop after failure.\">\u003cmeta data-mint-head name=\"twitter:image\" content=\"https://axottle.mintlify.site/_mintlify/api/og/v2?division=Flow+Studio\u0026amp;title=Flow+Guard%3A+Recovery\u0026amp;description=Manual+plans%2C+auto-recovery+policy%2C+route+reserves%2C+and+stop+after+failure.\u0026amp;theme=1e6ecda9e4b4d51039034be1\u0026amp;signature=fa32ea5ae249e6da7638a860263b4a371159520f93a7fe0431dd22f20f310475\">\u003cmeta data-mint-head name=\"twitter:image:width\" content=\"1200\">\u003cmeta data-mint-head name=\"twitter:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"msapplication-config\" content=\"/mintlify-assets/_mintlify/favicons/axottle/SSXPTGOjB4444J7B/_generated/favicon/browserconfig.xml\">\u003cmeta data-mint-head name=\"apple-mobile-web-app-title\" content=\"Axottle\">\u003cmeta data-mint-head name=\"msapplication-TileColor\" content=\"#16A34A\">\u003clink data-mint-head rel=\"canonical\" href=\"https://docs.axottle.com/en/connection-units/recovery\">\u003clink data-mint-head rel=\"alternate\" type=\"application/xml\" href=\"/sitemap.xml\">\u003clink data-mint-head rel=\"alternate\" type=\"text/markdown\" href=\"/en/connection-units/recovery.md\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"en\" href=\"https://docs.axottle.com/en/connection-units/recovery\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"ru\" href=\"https://docs.axottle.com/ru/connection-units/recovery\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"x-default\" href=\"https://docs.axottle.com/ru/connection-units/recovery\">\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https://docs.axottle.com/#organization\",\"name\":\"Axottle\",\"url\":\"https://docs.axottle.com\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https://mintcdn.com/axottle/M_1pCtiuK-QG0_4b/images/logo.png?fit=max\u0026auto=format\u0026n=M_1pCtiuK-QG0_4b\u0026q=85\u0026s=540a27bd4cb90fb752a37c98fd580664\"}},{\"@type\":\"WebSite\",\"@id\":\"https://docs.axottle.com#website\",\"name\":\"Axottle\",\"url\":\"https://docs.axottle.com\",\"publisher\":{\"@id\":\"https://docs.axottle.com/#organization\"}},{\"@type\":\"WebPage\",\"@id\":\"https://docs.axottle.com/en/connection-units/recovery#webpage\",\"url\":\"https://docs.axottle.com/en/connection-units/recovery\",\"name\":\"Flow Guard: Recovery\",\"description\":\"Manual plans, auto-recovery policy, route reserves, and stop after failure.\",\"dateModified\":\"2026-10-31T08:37:50.849Z\",\"isPartOf\":{\"@id\":\"https://docs.axottle.com#website\"},\"breadcrumb\":{\"@id\":\"https://docs.axottle.com/en/connection-units/recovery#breadcrumb\"}},{\"@type\":\"BreadcrumbList\",\"@id\":\"https://docs.axottle.com/en/connection-units/recovery#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Flow Studio\",\"item\":\"https://docs.axottle.com/en/connection-units/overview\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Flow Guard: Recovery\",\"item\":\"https://docs.axottle.com/en/connection-units/recovery\"}]},{\"@type\":[\"Article\",\"TechArticle\"],\"@id\":\"https://docs.axottle.com/en/connection-units/recovery#article\",\"headline\":\"Flow Guard: Recovery\",\"name\":\"Flow Guard: Recovery\",\"description\":\"Manual plans, auto-recovery policy, route reserves, and stop after failure.\",\"url\":\"https://docs.axottle.com/en/connection-units/recovery\",\"mainEntityOfPage\":{\"@id\":\"https://docs.axottle.com/en/connection-units/recovery#webpage\"},\"dateModified\":\"2026-10-31T08:37:50.849Z\",\"publisher\":{\"@id\":\"https://docs.axottle.com/#organization\"},\"isPartOf\":{\"@id\":\"https://docs.axottle.com#website\"}}]}\u003c/script>\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@type\":\"WebSite\",\"name\":\"Axottle\",\"publisher\":{\"@type\":\"Organization\",\"name\":\"Axottle\"},\"provider\":{\"@type\":\"Organization\",\"name\":\"Mintlify\",\"url\":\"https://mintlify.com\"}}\u003c/script>","agentPointerHref":"/en/connection-units/recovery.md","siteName":"Axottle","nav":{"global":null,"languages":[{"language":"ru","pages":[{"title":"ru","href":"/ru/connection-units/recovery"}]},{"language":"en","tabs":[{"tab":"Documentation","groups":[{"group":"Getting started","pages":[{"title":"Axottle documentation","icon":"house","href":"/en"},{"title":"What is Axottle?","icon":"circle-info","href":"/en/getting-started/overview"},{"title":"Architecture","icon":"diagram-project","href":"/en/getting-started/architecture"},{"title":"Glossary","icon":"book-open","href":"/en/getting-started/glossary"},{"title":"Requirements","icon":"clipboard-check","href":"/en/getting-started/requirements"},{"title":"Quick start","icon":"rocket","href":"/en/getting-started/quickstart"},{"title":"First connection","icon":"plug","href":"/en/getting-started/first-connection"}]},{"group":"Control panel","pages":[{"title":"Control panel: review","icon":"gauge","href":"/en/panel/overview"},{"title":"Dashboard","icon":"chart-line","href":"/en/panel/dashboard"},{"title":"Navigation on the panel","icon":"list-check","href":"/en/panel/navigation"},{"title":"Accounts and login","icon":"user-lock","href":"/en/panel/access-and-sessions"},{"title":"Entrance via Telegram","icon":"paper-plane","href":"/en/panel/telegram-login"},{"title":"Magazine and Audit Magazine","icon":"list-check","href":"/en/panel/journal-and-audit"},{"title":"Notifications","icon":"bell","href":"/en/panel/notifications"},{"title":"Settings","icon":"sliders","href":"/en/panel/settings"}]},{"group":"Flow Studio","pages":[{"title":"Flow Studio: Review","icon":"network-wired","href":"/en/connection-units/overview"},{"title":"Flow Constructor","icon":"sliders","href":"/en/connection-units/constructor"},{"title":"Remnawave Imports to Flow","icon":"file-import","href":"/en/connection-units/remnawave-import"},{"title":"HAProxy Park","icon":"server","href":"/en/connection-units/haproxy-park"},{"title":"WARP in Flow","icon":"route","href":"/en/connection-units/warp"},{"title":"Applications and versions of Flow","icon":"code-branch","href":"/en/connection-units/lifecycle"},{"title":"Routing","icon":"route","href":"/en/connection-units/routing"},{"title":"Transit pools","icon":"network-wired","href":"/en/connection-units/transit-pools"},{"title":"Telegram proxy","icon":"paper-plane","href":"/en/connection-units/telegram-proxies"},{"title":"Balancing Flow and Pools","icon":"scale-balanced","href":"/en/connection-units/balancing"},{"title":"Objectives of Reality","icon":"radar","href":"/en/connection-units/reality-targets"},{"title":"Diagnosis of Flow","description":"Static verification, live health, website availability, data freshness and incident history.","icon":"heart-pulse","href":"/en/connection-units/diagnostics"},{"title":"Flow Guard: Recovery","icon":"wrench","href":"/en/connection-units/recovery"},{"title":"Failure Lab and Readiness Testing","description":"How to model a Flow failure and distinguish the calculation from the confirmed result on the stand.","icon":"flask","href":"/en/connection-units/failure-lab"},{"title":"Flow troubleshooting","icon":"life-ring","href":"/en/connection-units/troubleshooting"}]},{"group":"Subscription page","pages":[{"title":"Subscription page: review","icon":"qrcode","href":"/en/subscription-page/overview"},{"title":"Installation of a subscription page","icon":"download","href":"/en/subscription-page/installation"},{"title":"Linking a page to Remnawave","icon":"link","href":"/en/subscription-page/remnawave"},{"title":"Design and selection of Flow","icon":"palette","href":"/en/subscription-page/presentation"},{"title":"Subscription announcements","icon":"bullhorn","href":"/en/subscription-page/announcements"},{"title":"Subscription API","icon":"code","href":"/en/subscription-page/api"}]},{"group":"Nodes and agents","pages":[{"title":"Nodes: review","icon":"server","href":"/en/nodes/overview"},{"title":"Node control panel","icon":"server","href":"/en/nodes/control-panel"},{"title":"Installation of the agent","icon":"rocket","href":"/en/nodes/installation"},{"title":"Node registration","icon":"key","href":"/en/nodes/enrollment"},{"title":"Node's life cycle","icon":"arrows-rotate","href":"/en/nodes/lifecycle"},{"title":"Agent and panel updates","icon":"cloud","href":"/en/nodes/updates"},{"title":"Metrics and services","icon":"gauge","href":"/en/nodes/metrics-and-services"},{"title":"Network addresses","icon":"network-wired","href":"/en/nodes/network"},{"title":"Domains and TLS","icon":"globe","href":"/en/nodes/domains"},{"title":"Diagnostics of nodes and agent","icon":"life-ring","href":"/en/nodes/troubleshooting"}]},{"group":"Providers","pages":[{"title":"Providers: review","icon":"cloud","href":"/en/operations/providers"},{"title":"Provider accounts","icon":"key","href":"/en/providers/accounts"},{"title":"Creating a server through the provider","icon":"server","href":"/en/providers/provisioning"}]},{"group":"Telepúrte","pages":[{"group":"Getting started","pages":[{"title":"Telepúrte","icon":"terminal","href":"/en/telepurte/overview"},{"title":"Telepúrte installation","icon":"download","href":"/en/telepurte/installation"},{"title":"First working scenario","icon":"play","href":"/en/telepurte/quickstart"},{"title":"Link to Axottle","icon":"key","href":"/en/telepurte/access"}]},{"group":"Fleet and connections","pages":[{"title":"Connection and node park","icon":"server","href":"/en/telepurte/nodes"},{"title":"Node's work page","icon":"display","href":"/en/telepurte/node-workspace"},{"title":"Projects, tags, groups and locations","icon":"folder-tree","href":"/en/telepurte/groups"},{"title":"Agents and Local Permits","icon":"microchip","href":"/en/telepurte/agents"},{"title":"SSH Bastions and Routes","icon":"network-wired","href":"/en/telepurte/gateways"}]},{"group":"Users and node operations","pages":[{"title":"Users and personal accounts","icon":"users","href":"/en/telepurte/users"},{"title":"Roles, grants and effective access","icon":"key","href":"/en/telepurte/roles"},{"title":"Temporary and guest access","icon":"clock","href":"/en/telepurte/temporary-access"},{"title":"Web SSH and a regular SSH client","icon":"terminal","href":"/en/telepurte/terminal"},{"title":"Web SFTP and File Editor","icon":"folder-open","href":"/en/telepurte/files"},{"title":"Security policies","icon":"shield-halved","href":"/en/telepurte/security"}]},{"group":"Automation","pages":[{"title":"Playbooks and action catalogue","icon":"list-check","href":"/en/telepurte/playbooks"},{"title":"Bash, Ansible, files and variables","icon":"file-code","href":"/en/telepurte/scripts"},{"title":"Starting, Results and Stopping Tasks","icon":"gears","href":"/en/telepurte/jobs"},{"title":"Schedules","icon":"calendar","href":"/en/telepurte/schedules"},{"title":"Configuration and discrepancies control","icon":"file-circle-check","href":"/en/telepurte/configurations"},{"title":"One-off teams and profiles","icon":"code","href":"/en/telepurte/commands"}]},{"group":"Monitoring and operations","pages":[{"title":"Sessions, recordings and audit","icon":"clipboard-list","href":"/en/telepurte/audit"},{"title":"Status of system and notifications","icon":"chart-line","href":"/en/telepurte/monitoring"},{"title":"Update and maintenance","icon":"screwdriver-wrench","href":"/en/telepurte/operations"},{"title":"Backups and restoration","icon":"database","href":"/en/telepurte/backups"},{"title":"MCP: Connecting external clients","icon":"plug","href":"/en/telepurte/mcp"},{"title":"Diagnostics of problems","icon":"wrench","href":"/en/telepurte/troubleshooting"}]}]},{"group":"CDN","pages":[{"title":"CDN: review","icon":"cloud","href":"/en/cdn/overview"},{"title":"Providers and accounts","icon":"plug","href":"/en/cdn/providers"},{"title":"Resources and operations","icon":"list-check","href":"/en/cdn/resources-and-operations"},{"title":"DNS for CDN","icon":"globe","href":"/en/cdn/dns"},{"title":"Observability of CDN","icon":"gauge","href":"/en/cdn/observability"},{"title":"Coping with CDN problems","icon":"life-ring","href":"/en/cdn/troubleshooting"}]},{"group":"Health and self-healing","pages":[{"title":"Review of the health system","icon":"heart-pulse","href":"/en/health/overview"},{"title":"Conditions and severity","icon":"gauge","href":"/en/health/states"},{"title":"Levels of inspections","icon":"list-check","href":"/en/health/probes"},{"title":"Bscheck's external checks","icon":"tower-broadcast","href":"/en/health/bscheck"},{"title":"dashboard health","icon":"gauge-high","href":"/en/health/dashboard"},{"title":"Reconstruction","icon":"wrench","href":"/en/health/self-heal"},{"title":"Health policies","icon":"sliders","href":"/en/health/policies"},{"title":"Node suppression","icon":"bell-slash","href":"/en/health/suppression"},{"title":"Runbook","icon":"life-ring","href":"/en/health/runbooks"}]},{"group":"Remnawave","pages":[{"title":"Integration with Remnawave","icon":"plug","href":"/en/remnawave/overview"},{"title":"Connecting the Remnawave panel","icon":"network-wired","href":"/en/remnawave/connections"},{"title":"Synchronization of Remnawave","icon":"rotate","href":"/en/remnawave/synchronization"},{"title":"Backup copies of Remnawave","icon":"database","href":"/en/remnawave/backups"},{"title":"External PostgreSQL","icon":"database","href":"/en/remnawave/external-database"},{"title":"Moving to another server","icon":"truck-fast","href":"/en/remnawave/migration"},{"title":"Remnawave Update","icon":"arrow-up-right-dots","href":"/en/remnawave/updates"},{"title":"Troubleshooting Remnawave","icon":"life-ring","href":"/en/remnawave/troubleshooting"}]},{"group":"Status page","pages":[{"title":"Status page: review","icon":"tower-broadcast","href":"/en/statuspage/overview"},{"title":"Setting up a status page","icon":"download","href":"/en/statuspage/installation"},{"title":"Statuspage Updates","icon":"arrows-rotate","href":"/en/statuspage/updates"},{"title":"Components and inspections","icon":"layer-group","href":"/en/statuspage/components"},{"title":"Incidents and planned work","icon":"triangle-exclamation","href":"/en/statuspage/incidents"},{"title":"Processing","icon":"palette","href":"/en/statuspage/appearance"},{"title":"Access and entry to the team","icon":"lock","href":"/en/statuspage/access"}]},{"group":"AbuseProtect","pages":[{"title":"AbuseProtect: A review","icon":"shield","href":"/en/abuse/overview"},{"title":"Signal detection","icon":"radar","href":"/en/abuse/detection"},{"title":"Anti-Abuse Policy","icon":"sliders","href":"/en/abuse/policies"},{"title":"Temporary deceleration (QoS)","icon":"gauge","href":"/en/abuse/qos"},{"title":"Privacy of Anti-Abuse","icon":"user-shield","href":"/en/abuse/privacy"},{"title":"Incidents and evidence","icon":"list-check","href":"/en/abuse/incidents"}]},{"group":"Axosun assistant","pages":[{"title":"Axosun - review","icon":"robot","href":"/en/axosun/overview"},{"title":"Opportunities","icon":"list-check","href":"/en/axosun/capabilities"},{"title":"The model of rights","icon":"sliders","href":"/en/axosun/permissions"},{"title":"Data and privacy","icon":"lock","href":"/en/axosun/privacy"},{"title":"Connecting an LLM provider","icon":"key","href":"/en/axosun/configuration"},{"title":"Sessions and launches","icon":"terminal","href":"/en/axosun/sessions-and-runs"},{"title":"Safety locks","icon":"shield","href":"/en/axosun/safety"},{"title":"FAQ","icon":"life-ring","href":"/en/axosun/faq"}]},{"group":"Customer support","pages":[{"title":"Review of the support module","icon":"headset","href":"/en/support/overview"},{"title":"Primary tuning","icon":"play","href":"/en/support/setup"},{"title":"Telegram channels","icon":"paper-plane","href":"/en/support/channels"},{"title":"Work from Telegram","icon":"comments","href":"/en/support/operator-forum"},{"title":"Tickets","icon":"ticket","href":"/en/support/tickets"},{"title":"SLA","icon":"stopwatch","href":"/en/support/sla"},{"title":"Investments and storage","icon":"paperclip","href":"/en/support/attachments"},{"title":"AI circuit","icon":"brain","href":"/en/support/ai"},{"title":"Knowledge base and training","icon":"graduation-cap","href":"/en/support/knowledge"},{"title":"Models of AI","icon":"microchip","href":"/en/support/models"},{"title":"Operators and roles","icon":"users","href":"/en/support/operators"},{"title":"Operator portal","icon":"door-open","href":"/en/support/portal"},{"title":"Analytics and evaluations","icon":"chart-line","href":"/en/support/analytics"},{"title":"Mass incidents","icon":"triangle-exclamation","href":"/en/support/incidents"},{"title":"Support settings","icon":"gear","href":"/en/support/settings"}]},{"group":"Operations","pages":[{"title":"Backup copies of the panel","icon":"database","href":"/en/operations/backups"},{"title":"Updating the panel","icon":"arrows-rotate","href":"/en/operations/updates"},{"title":"GeoAssets","icon":"earth","href":"/en/operations/geo-assets"},{"title":"Egress Guard","icon":"shield-halved","href":"/en/operations/egress"},{"title":"Service and Axottle Doctor","icon":"stethoscope","href":"/en/operations/maintenance"},{"title":"Response to incidents","icon":"life-ring","href":"/en/operations/incident-response"}]},{"group":"Security","pages":[{"title":"Security review","icon":"shield-halved","href":"/en/security/overview"},{"title":"Entrance protection","icon":"key","href":"/en/security/authentication"},{"title":"Access rights","icon":"user-shield","href":"/en/security/authorization"},{"title":"Secrets and tokens","icon":"lock","href":"/en/security/secrets"},{"title":"Encryption and TLS","icon":"certificate","href":"/en/security/encryption"},{"title":"Network security","icon":"network-wired","href":"/en/security/network-security"},{"title":"Disguisement (selfsteal)","icon":"mask","href":"/en/security/masking"},{"title":"Audit and compliance","icon":"clipboard-check","href":"/en/security/audit-and-compliance"},{"title":"hardening","icon":"screwdriver-wrench","href":"/en/security/hardening"},{"title":"Vulnerability management","icon":"bug-slash","href":"/en/security/vulnerability-management"}]},{"group":"Reference","pages":[{"title":"Panel configuration","icon":"sliders","href":"/en/reference/configuration"},{"title":"Environment variables","icon":"list-check","href":"/en/reference/environment-variables"},{"title":"CLI axottle","icon":"terminal","href":"/en/reference/cli"},{"title":"Error codes","icon":"circle-exclamation","href":"/en/reference/error-codes"},{"title":"Journal of Changes","icon":"clock-rotate-left","href":"/en/reference/changelog"}]},{"group":"Troubleshooting","pages":[{"title":"Frequent problems","icon":"circle-question","href":"/en/troubleshooting/common-problems"},{"title":"Connectivity issues","icon":"link-slash","href":"/en/troubleshooting/connectivity"},{"title":"Productivity","icon":"gauge","href":"/en/troubleshooting/performance"},{"title":"Escalation","icon":"life-ring","href":"/en/troubleshooting/escalation"}]}]},{"tab":"API","pages":[{"title":"API","href":"/en/api-reference/overview"}]}]}]},"basePath":"","title":"Flow Guard: Recovery - Axottle","deploymentId":"dpl_7AgmPo2RyRWZ68ZGceW618SWGEAz","buildId":"dpl_7AgmPo2RyRWZ68ZGceW618SWGEAz","dynamics":[],"chunks":[]}